Distribution and markets of diamonds
|
|
The Diamond Trading Company, or DTC, is a subsidiary of De Beers and
markets rough diamonds produced both by De Beers mines and other
mines from which it purchases rough diamond production. DTC performs
sophisticated sorting of rough diamonds into over 16,000 categories,
and then sells bulk lots of rough diamonds to a limited number of
sight holders a few times a year. Once purchased by sight holders,
diamonds are cut and polished in preparation for sale as gemstones.
The cutting and polishing of rough diamonds is a specialized skill
that is concentrated in a limited number of locations worldwide.
Traditional diamond cutting centers are Antwerp, Amsterdam,
Johannesburg, New York, and Tel Aviv. Recently, diamond cutting
centers have been established in China, India, and Thailand. |
Cutting centers with lower costs of
labor, notably Surat in Gujarat, India, handle a larger
number of smaller carat diamonds, while smaller quantities
of larger or more valuable diamonds are more likely to be
handled in Europe or North America. Demonstrating this,
India produces 90% of all cut and polished diamonds by
number, but only 55% by value. The recent expansion of this
industry in India, employing low cost labor, has allowed
smaller diamonds to be prepared as gems than was previously
economically feasible.
Diamonds which have been prepared as gemstones are sold on
diamond exchanges called bourses. There are 24 registered
diamond bourses. This is the final tightly controlled step
in the diamond supply chain; wholesalers and even retailers
are able to buy relatively small lots of diamonds at the
bourses, after which they are prepared for final sale to the
consumer. Diamonds can be sold already set in jewelry, or as
is increasingly popular, sold unset ("loose"). According to
the Rio Tinto Group, in 2002 the diamonds produced and
released to the market were valued at US$9 billion as rough
diamonds, US$14 billion after being cut and polished, US$28
billion in wholesale diamond jewelry, and retail sales of
US$57 billion.
Synthetics, simulants, and enhancements
It is important to distinguish that a synthetic diamond is a
true diamond created by a technological process, whereas a
diamond simulant is defined as a non-diamond material that
is used to simulate the properties of a true diamond.
The gemological and industrial uses of diamond have created
a large demand for raw stones. A portion of this demand is
now being met by synthetic diamonds, man-made diamonds which
have similar properties to natural diamonds. This process
has historically produced industrial-grade diamonds, but
synthetic diamond producers have recently begun to produce
diamonds with high enough quality to penetrate the gem
diamond market. Diamonds have been manufactured
synthetically for over fifty years.
A diamond's gem quality, which is not as dependent on
material properties as industrial applications, has invited
both imitation and the invention of procedures to enhance
the gemological properties of natural diamonds. Materials
which have similar gemological characteristics to diamond
but are not real mined or synthetic diamond are known as
diamond simulants. The most familiar diamond simulant to
most consumers is cubic zirconia (commonly abbreviated as
CZ); recently moissanite has also gained cachet as a popular
diamond simulant. Both CZ and moissanite are synthetically
produced for use as a diamond simulant. Diamond enhancements
are specific treatments, performed on natural diamonds
(usually those already cut and polished into a gem), which
are designed to better the gemological characteristics of
the stone in one or more ways. These include laser drilling
to remove inclusions, application of sealants to fill
cracks, treatments to improve a white diamond's color grade,
and treatments to give fancy color to a white diamond.
Currently, trained gemologists with appropriate equipment
are able to distinguish natural diamonds from all synthetic
and simulant diamonds, and identify all enhanced natural
diamonds. The established natural diamond industry has a
vested interest in maintaining the distinction between
natural diamonds and other diamonds, and has made
significant investments toward that end. However, as
manufacturing technology improves, synthetic diamonds may
become indistinguishable from natural diamonds, and new
techniques for creating and treating simulants (such as
coating them with a very thin diamond-like layer of carbon)
are making it increasingly difficult to distinguish
simulants from real diamonds.Symbolism
Because of their extraordinary physical properties,
diamonds have been used symbolically since near the time of
their first discovery. Perhaps the earliest symbolic use of
diamonds was as the eyes of Hindu devotional statues. The
diamonds themselves were thought to be endowments from the
gods and were therefore cherished. The point at which
diamonds began to be associated with divinity is not known,
but early texts indicate that it was recognized in India
since at least 400 BCE. It is said the Greeks believed
diamonds were tears of the gods; the Romans believed they
were splinters of fallen stars. Many long dead cultures have
sought to explain diamond's superlative properties through
divine or mystical affiliations.
In Tibetan Buddhism, also known as Vajrayana (Diamond
Vehicle), diamonds are an important symbol, and the Diamond
Sutra is one of the most popular texts.
In Western culture, diamonds are the traditional emblem of
fearlessness and virtue, but have also often associated with
power, wealth, crime and misfortune. Today, diamonds are
used to symbolize eternity and love, being often seen
adorning engagement rings and sometimes wedding rings as
well. The popularity of this modern tradition can be traced
directly to the marketing campaigns of De Beers, starting in
1938. Prior to the De Beers marketing campaign, engagement
rings had no one particular stone associated with them. The
first diamond engagement ring can be traced to the marriage
of Maximilian I (then Archduke of Austria) to Mary of
Burgundy in 1477. Other early examples of betrothal jewels
incorporating diamonds include the Bridal Crown of Blanche
(ca. 1370–80) and the Heftlein brooch of Vienna (ca.
1430–40), a pictorial piece depicting a wedding couple.
Inaccessibility of diamonds to the vast majority of the
population limited the popularity of diamonds as betrothal
jewels during this period.
The LifeGem company further taps modern symbolism by
purporting to synthetically convert the carbonized remains
of people or pets into "memorial diamonds." However, many
people feel very uncomfortable at the thought of wearing the
carbonized remains of people as jewelry.
The diamond is the birthstone for people born in the month
of April, and is also used as the symbol of a sixty-year
anniversary, such as a Diamond Jubilee (see hierarchy of
precious substances).
Diamonds are a common focus of fiction. Notable pieces of
fiction include Ian Fleming's Diamonds Are Forever (1956),
Arthur C. Clarke's 2061: Odyssey Three (1988) and Neal
Stephenson's The Diamond Age (1995). In addition, diamonds
are the subject of various myths and legends.
|
 |
|
Nofeerentals.com No fee one and two bedroom, Downtown Manhattan rental apartments New York City Nofeerentals.com no fee rental apartments in Downtown Manhattan New York NY studio, one bedroom, two bedroom, three bedroom , rental apts http://www.nofeerentals.com/new-york/manhattan/downtown.asp
Notasinc.com Tapestry hand made wall hangings Crespos of natural fibers, leather and wool. Tapestry hand made wall hangings elaborated with natural fibers, leather and wool, original designs for every space at your home or office. Each one is a unique piece of art decoration http://www.notasinc.com/tapestry.htm
White gold Diamond Ruby Bracelet at Jewelheaven.com Ruby bracelet is one of the types of ornamental jewelry worn around the wrist. The Ruby bracelet is one of the most romantic and elegant piece of jewelry. Wear ruby bracelet, it for health, wealth, wisdom and love. http://www.jewelheaven.com/Ruby-Bracelet.asp
Lansend.com: Microsoft Certified Computer consultants in New York, NY Microsoft Certified Computer consultants providing computer and network consulting services in New York ,NY Manhattan Queens, Lan Wan Networking VPN. http://www.lansend.com
Plush Dijon futon cover is a microfiber futon cover velvet suede futon cover
Plush Dijon futon covers is a microfiber futon cover. A mustard color velvety
soft like suede futon cover poly cotton machine washable futon covers
http://www.futonstogo.com/details-of-product/futon-cover-plush-dijon-suede-solid.asp
|